We have exactly what you are looking for.
I reached out to my contact at Lippert and based on the information on the axle tag you provided your 8000lb axle uses the following replacement parts:
Inner bearing: # 25580
Inner race: # 25520
Outer bearing: # 02475
Outer race: # 02420
Grease seal: # GS-2250DL
However we do not sell the hub/rotor assembly that is needed for your axle but it can be order through Lippert as part number 792676. view full answer...
It appears that the HydraStar Disc Brake Kit # HSE7K-T1 is the correct kit for your 2021 Vanleigh Vilano 320GK. To verify this you can find the axle serial numbers and send that information to me so I can verify all the components are correct. Otherwise you can disassemble one of your hubs to verify your spindle measurements.
This kit uses
Inner bearing # 25580 (inner diameter 1.750")
Outer bearing # 14125A (inner diameter 1.250)
Grease Seal # GS-2250DL (inner diameter 2.250")
Wheel... view full answer...
The Reese Goosebox you'll need and be able to fit on your trailer will depend on the actual trailer. In addition to the GVWR of the trailer, which will be used to determine the capacity you'll need (either 16k or 20k), you will need to know the pin box model number- either Lippert 1621, 1117, etc.. We do not have specific information on what pin boxes are used on particular trailers, so you'll want to check the pin box for the spec sticker, which should have the model number printed on... view full answer...
Yes, the Goodyear G114 215/75R17.5 Tire w/ 17-1/2" Lynx Wheel and Sensor part # LH43FR does come with a pre-installed TPMS sensor. It works with TST TPMS monitors such as the Color Monitor for TST TPMS Systems part # TST-507-D-C. That's all that is needed, the wheel/tire/sensor combo and monitor. view full answer...
The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570 will work with the factory hangers on your 2021 Vanleigh Vilano 320GK. This system is far superior to the standard Lippert suspension you have as it includes shocks for cushioning and allows the suspension to act more independently which increases traction to reduce sway. I do feel this is the best system available for the suspension on your 5th wheel. view full answer...
I looked up as much as I could on your 2018 Van Leigh 365RL Vilano and wasn't able to get the exact size. It's either going to be 1/2 inch or 9/16 inch based on what I was able to find on the bolt pattern. For 9/16 inch we have the part # LHLR110 and for 1/2 inch we have the # LHLR103. view full answer...
Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is.
This may be difficult as some wheels and covers will make this harder to determine. You can also measure from common points in reference to the axle. Such as the front of the front axle tube to front of the 2nd axle tube or front of front tire to front of rear tire. If you do that you will want to be sure... view full answer...
We've had this question in the past and when we checked with Furrion they told us that they discontinued the oven you have and the replacement parts are no longer available.
The best solution for this would be to replace the oven with a newer model like the Furrion 2-in-1 Gas Oven and Range # FR37KR, which would give you a replacement oven and a new range all in one. It's not a perfect solution but because these ovens have been discontinued it would be the only option available. view full answer...
For a great 2 bike rack that is confirmed for use at the rear of a fifth wheel trailer where the ride quality is much rougher the Swagman Dispatch part # S44FR would be a great option we would recommend highly.
For more info it check out the review video link attached to this page. view full answer...
So the difference is purely in how the two connect to your sewer pipe, which will also tell you which one you need; one will slide into the pipe (the spigot) while the other will slide onto the pipe (the hub):
- Slide Into Pipe: Valterra Waste Valve for RV Black Water Tank - 3" Spigot to 3" Lug # T50A
- Slide Onto Pipe: Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug # T50
To secure the valves to your pipe you would just need the Valterra ABS Solvent Cement # A05-0303. view full answer...
The number of leaves on a leaf spring is not the only determining factory in the amount of weight it can handle. The thickness of each leaf as well as what the leaf is made out of can affect the weight rating and performance of the spring.
The Roadmaster Comfort Ride Leaf Spring Suspension Kit # RM-2460-2570 does use 5 leaves that are 3/8" thick. Each spring is rated for 3,500lbs which is 7,000lbs per axle. This kit upgrades your suspension by allowing the axles to act independently of... view full answer...
Definitely a smart idea to replace your Atwood heater with a tankless unit, as they are much more energy-efficient and quicker to heat your water. We do have an option that will easily fit in place of your 16" x 15-1/2" x 20-7/8" Atwood GC10A-4E, which is a unit from Furrion, and it will require the correct size access door as well:
- Furrion RV Tankless Water Heater # FR93FR
- Access Door for Furrion RV Tankless Water Heater - 18" x 18" # FR73FR
Th Furrion measures 19-3/16" deep x 12-5/8"... view full answer...
Thank you for providing those pictures, using the pictures I was able to determine that the Replacement Touch Screen Control Panel # LC83VR is the correct replacement for your Lippert jack system. view full answer...
For your Fan-Tastic Vents you'll need the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR. These covers are specifically designed for Fan-Tastic vents and will use the same screws that your vent uses to mount to the roof of your 2022 VanLeigh Vilano 390 fifth wheel. view full answer...
Since you have 8K 3" axles you'll just need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles # RM-2460-2580.
The 3-1/2" requirement you were getting with the # RM-2470-2580 was simply because of the shock kit. I do recommend replacing your U-Bolts as well though with ones like # APUBR-9 as these get stretched and worn out after being torqued down and could potentially cause an issue down the road. These U-Bolts fit a 3" axle with 1-3/4" or... view full answer...
Yes - the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches # HLY64FR is the same as model HR1700. We here at etrailer usually have different part numbers than the bike rack manufacturer.
With the ladder at the middle of your 2022 Grand Design Reflection 341RDS, there is a way to know for sure if the rack does not interfere with the RV Rider when folded up. The measurement you need to conduct is from the center of your hitch pin hole to the furthest outward point of... view full answer...
54 lbs. The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item # RM-2460 will add 54 lbs to your 2021 Vanleigh Vilano 5th wheel trailer. This tandem axle kit works with 3" diameter 5,200 lbs to 7,000 lbs axles. view full answer...
I took a look at what Lippert and ourselves offer as replacements for the Lippert Solera awning, and the outer cover for the arm that you mentioned is actually offered as a replacement part.
Instead, to replace that piece, you're going to have to replace the entire arm assembly with something like the:
-Solera 69" Standard Flat Awning Support Arm # LC281154 which will work with power and manual awnings, and measures 69" in length.
If you can let me know what size you need, I'll be happy... view full answer...
As your 2022 Vanleigh Vilano 320GK has a GVWR of 16,000lbs and uses 8,000lb axles you will need to use the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks # RM-2460-2580. This will have the 8,000lb leaf springs while the kit # RM-2460-2570 you found only has 7,000LB springs for a lighter axle. Both kits include the shocks for 3" round axles as well so you will be able to mount them on your axles. view full answer...